Grinder
It has a simple and reasonable structure, low operating cost, and uses the stone-on-stone principle with minimal wear.
It features high crushing efficiency and energy saving. It has both fine crushing and coarse grinding functions.
It is less affected by the moisture content of the material (moisture content can reach about 8%).
The working noise is low (below 75 decibels) and dust pollution is minimal.
It is suitable for crushing medium-hard and extra-hard materials.
The product forms cubic particles with large bulk density and extremely low iron contamination.
The wheel lining has small wear and is convenient for maintenance.
The ultra-fine composite crusher is a high-efficiency and energy-saving crushing equipment, mainly used to directly crush materials with a maximum side length of 450-700mm to below 5-8mm. It has characteristics such as no clogging, low equipment investment, low energy consumption, and low maintenance costs. It is widely applied in mining, cement, building materials, chemical industry and other sectors, suitable for crushing materials such as limestone, clayey sandstone, rocks, gypsum, coal, etc., with a compressive strength not exceeding 200MPa.
The material enters the chamber through the feed hopper, falls onto the high-speed rotating impact hammers, and is initially crushed by the action between the hammer strikes and the(rebound plate). After multiple repeated hammer strikes and rebounds, the material descends onto the middle partition plate to form a pile, slides down, and lands on the material-throwing disc of the high-speed rotating lower rotor. It is then thrown at high speed against the rebound plate for further crushing and grinding, achieving an ultra-fine effect.
| Parameter/Specification | JNG2214 | JNG2414 | JNG2818 | JNG3020 | Remarks |
| Cylinder Diameter (m) | 2.2 | 2.4 | 2.8 | 3 | This dryer series has multiple models. The length-diameter ratio can be selected based on on-site conditions and the properties of the material to be dried. |
| Cylinder Length (m) | 14 | 14 | 18 | 20 | |
| Power (KW) | 37 | 45 | 75 | 110 | |
| Weight (t) | 40.1 | 44 | 80 | 90 | |
| Processing Capacity (t/h) | 20-25 | 25-30 | 48-55 | 65-70 | |
| Inlet Moisture Content (%) | 27-30 | 27-30 | 27-30 | 27-30 | |
| Outlet Moisture Content (%) | 8-12 | 8-12 | 8-12 | 8-12 |
Shandong Xinjia Heavy Industry Technology Co., Ltd. shines in the heavy industry sector with its exceptional quality. Through advanced manufacturing processes, we create reliable products that empower clients to boost their competitiveness. On this journey of development, Xinjia Heavy Industry stands as a steadfast support, helping realize extraordinary dreams and co-create a glorious future – a testament to your trust and choice. Innovation-driven, Smart Manufacturing for the Future. Shandong Xinjia Heavy Industry Technology Co., Ltd. pioneers intelligent manufacturing through innovative integration, delivering efficient and smart heavy industry solutions. In the new era's wave, we assist clients in achieving industrial upgrades and shaping a future of smart manufacturing. By collaborating to paint development blueprints, we emerge as a vanguard force driving industry progress.
